View GX680_159593.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Stabilizing bar
w
w
ta a D . w
Fuji GX680 Stitching Back A d a p t e r om these instructions before using this adapter. Please read .c The Kapture Group Fuji GX 680 Stitching Adapter enables the 4U et stitching of 2 images in landscape or portrait orientation. A center detent for single image capture is also provided. he S
When stitching, you must first pull the detent release knob. After the sliding plate starts to move you may release it. It will automatically drop into the selected detent. Make your first capture and then pull the release knob again and slide the adapter plate to the opposite side until it locks in place.
The overlap selector rotates 180 degrees with red dots on one side and white dots on the other. These dots correspond with the red or white dots on the adapter plate. If you are using a 4x4 or 5x4 chip select the red dot. When using a 2x3 chip select the white dot for portrait shots and the red dot for landscape imaging.
Landscape stitching
w
w
.D w
t a
S a
e h
t e
U 4
.c
m o
Center lock
Mounting the Fuji stitching adapter The stabilizing bar must be retracted before attaching or rotating this adapter. Simply pull both ends of the stabilizing bar back fully. Next, align the rotating back as shown in the photo above. Rotate the stitching adapter to the desired orientation. Push both ends of the stabilizing bar toward the Fuji camera body until it is snug. When the detent release knob is at the 12 o'clock position you are in the landscape mode. Rotating the adapter plate another 90 degrees clockwise puts you in the portrait mode. Kapture Group Inc. 5470 Pebble Lane Osage Beach, MO 65065 800 879 4955 573 302 1969 573 302 1415 fax
Portrait stitching
(c) Copyright 2004 - Kapture Group, Inc - All rights reserved
w
w www.kapturegroup.com w support@kapturegroup.com
.D
a
aS t
ee h
4U t
om .c
Fuji GX680 Stitching Back A d a p t e r Masking Options
1
2
3
4
5
1: 2x3 non-stitching 2: 2x3 stitching landscape mounted chip
3: 2x3 stitching - portrait mounted chip
6
7
4: 4x4 non-stitching 5: 4x4 stitching 6: 5x4 non-stitching 7: 5x4 stitching - portrait mounted chip
Please note: Most digital backs have 2 sets of Hasselblad mounting clips. This allows the back to mounted in either the portrait or landscape orientation. Landscape mounted chips and portrait mounted chips refer to the digital back's orientation relative to the Hasselblad mounts on the Fuji Stitching Adapter.
Kapture Group Inc. 5470 Pebble Lane Osage Beach, MO 65065 800 879 4955 573 302 1969 573 302 1415 fax www.kapturegroup.com support@kapturegroup.com
(c) Copyright 2004 - Kapture Group, Inc - All rights reserved

▲Up To Search▲

Price & Availability of GX680

	To Download GX680 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .